ALLiNWOW ConClean – Professional Concrete Cleaner
ConClean tackles the kind of mess that bonds to concrete’s pores: engine oil, cement haze, dust binders, and jobsite films. Instead of stripping the surface with harsh acids, the formula uses high‑efficiency surfactants and conditioners to lift soils so they rinse away cleanly, leaving a neutral finish that’s ideal before sealing or coating. For a quick overview and practical checklist, see this resource and a concise how‑to guide.
Technology & Formula
A microemulsion system breaks the bond between oils and the calcium‑silicate matrix without etching. Penetration aids drive chemistry into capillaries so dark stains release from below the surface. Chelators keep minerals suspended during rinse to avoid a chalky film. The result is a bright, clean slab with no slippery residue. For deeper context on prep workflows, browse this compact reference and condensed application note.
Where It Works
- Warehouses, garages, and workshops
- Driveways, loading bays, and ramps
- Pre‑seal cleaning for decorative concrete
How to Use
- Sweep or vacuum loose dust. Pre‑wet hot slabs to cool.
- Apply ConClean liberally; allow 3–7 minutes on heavy soil.
- Agitate with a deck brush or scrubber. Keep the area wet.
- Rinse thoroughly; extract or squeegee to waste. Repeat for deep oil.
Surface Science & Insight
Concrete is a network of capillaries; oils wick downward and re‑appear as “ghost stains.” Treat slightly beyond the visible edge and use extraction—pulling soiled solution out of pores—to prevent shadowing. Fun fact: freshly placed concrete can take weeks to fully hydrate; early acid washing can weaken the cream layer. Neutral chemistry preserves the surface profile for better coating adhesion.
Safety & Compatibility
Suitable for cured concrete and cementitious stone when used as directed. Avoid unsealed colored overlays until tested in a small area. Do not mix with strong oxidants or acids. Store cool and out of sunlight.
Reviews
There are no reviews yet.